PCB设计中专业英译术语之综合词汇

jay666

　　1. 板：board
　　2. 印制板：printed board
　　3. 印制电路：printed circuit
　　4. 印制线路：printed wiring
　　5. 印制线路板：printed wiring board(PWB)
　　6. 印制板电路：printed circuit board (PCB)
　　7. 印制接点：printed contact
　　8. 印制组件：printed component
　　9. 印制板装配：printed board assembly
　　10. 单面印制板：single-sided printed board(SSB)
　　11. 双面印制板：double-sided printed board(DSB)
　　12. 多层印制板：mulitlayer printed board(MLB)
　　13. 多层印制电路板：mulitlayer printed circuit board
　　14. 多层印制线路板：mulitlayer prited wiring board
　　15. 刚性印制板：rigid printed board
　　16. 刚性单面印制板：rigid single-sided printed borad
　　17. 刚性双面印制印制板装配：printed board assembly
　　18. 刚性多层印制板：rigid multilayer printed board
　　19. 挠性多层印制板：flexible multilayer printed board
　　20. 挠性印制板：flexible printed board
　　21. 挠性单面印制板：flexible single-sided printed board
　　22. 挠性双面印制板：flexible double-sided printed board
　　23. 挠性印制电路：flexible printed circuit (FPC)
　　24. 挠性印制线路：flexible printed wiring
　　25. 刚性印制板：flex-rigid printed board, rigid-flex printed board
　　26. 刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double-sided printed
　　27. 刚性多层印制板：flex-rigid multilayer printed board, rigid-flex multilayer printed board
　　28. 齐平印制板：flush printed board
　　29. 金属芯印制板：metal core printed board
　　30. 金属基印制板：metal base printed board
　　31. 多重布线印制板：mulit-wiring printed board
　　32. 陶瓷印制板：ceramic substrate printed board
　　33. 导电胶印制板：electroconductive paste printed board
　　34. 模塑电路板：molded circuit board
　　35. 模压印制板：stamped printed wiring board
　　36. 顺序层压多层印制板：sequentially-laminated mulitlayer
　　37. 散线印制板：discrete wiring board
　　38. 微线印制板：micro wire board
　　39. 积层印制板：buile-up printed board
　　40. 积层多层印制板：build-up mulitlayer printed board (BUM)
　　41. 积层挠印制板：build-up flexible printed board
　　42. 表面层合电路板：surface laminar circuit (SLC)
　　43. 埋入凸块连印制板：B2it printed board
　　44. 多层膜基板：multi-layered film substrate(MFS)
　　45. 层间全内导通多层印制板：ALIVH multilayer printed board
　　46. 载芯片板：chip on board (COB)
　　47. 埋电阻板：buried resistance board
　　48. 母板：mother board
　　49. 子板：daughter board
　　50. 背板：backplane
　　51. 裸板：bare board
　　52. 键盘板夹心板：copper-invar-copper board
　　53. 动态挠性板：dynamic flex board
　　54. 静态挠性板：static flex board
　　55. 可断拼板：break-away planel
　　56. 电缆：cable
　　57. 挠性扁平电缆：flexible flat cable (FFC)
　　58. 薄膜开关：membrane switch
　　59. 混合电路：hybrid circuit
　　60. 厚膜：thick film
　　61. 厚膜电路：thick film circuit
　　62. 薄膜：thin film
　　63. 薄膜混合电路：thin film hybrid circuit
　　64. 互连：interconnection
　　65. 导线：conductor trace line
　　66. 齐平导线：flush conductor
　　67. 传输线：transmission line
　　68. 跨交：crossover
　　69. 板边插头：edge-board contact
　　70. 增强板：stiffener
　　71. 基底：substrate
　　72. 基板面：real estate
　　73. 导线面：conductor side
　　74. 组件面：component side
　　75. 焊接面：solder side
　　76. 印制：printing
　　77. 网格：grid
　　78. 图形：pattern
　　79. 导电图形：conductive pattern
　　80. 非导电图形：non-conductive pattern
　　81. 字符：legend
　　82. 标志：mark
　　以上即是PCB设计中专业英译术语之综合词汇